DIY Kits How To:
![](https://pagestudio.s3.theshoppad.net/altered-timber/bd72a20dbc3cd0f1330c380882f3094c.jpg)
Step 1- Paint, Get creative! You can use acrylic paints, spray paint, stains, or even decoupage. !!!Make sure to allow enough time to fully dry before continuing!!!
![](https://pagestudio.s3.theshoppad.net/altered-timber/12094d4d037a7726e7d1ba7505673dd0.jpg)
Step 2- Peel white paper from the back of your designs to expose the adhesive backing.
PLEASE NOTE: If you have an outdoor kit like the porch signs, they do not come with the adhesive backing. You will need to apply the supplied E6000 glue to the back of the design to ensure proper adhesion to the board since it will be in an outdoor environment.
We like to use dots of glue across the back, a little goes a long way!
Pro Tip: Use a toothpick to dab glue on smaller pieces
![](https://pagestudio.s3.theshoppad.net/altered-timber/3e4e25f890e51d875f8073a6c4909e49.jpg)
Step 3- Place designs onto round background and press down firmly to ensure good adhesion.
For outdoor kits like the porch signs, after applying glue and firmly pressing pieces into place, keep the finished piece laying down until the glue dries to ensure pieces stay in place before standing up.
![](https://pagestudio.s3.theshoppad.net/altered-timber/fba6889e8eaf927b61483bdb6682bb50.jpg)
Step 4- For the 10" Round Kits, Assemble the stand by sliding the interlocking cutouts together. (one on top, the other on the bottom)
![](https://pagestudio.s3.theshoppad.net/altered-timber/a7721e86cd381e038c00afaec090746c.jpg)
Step 5- Place finished kit on stand and enjoy!
PLEASE NOTE: If you have an outdoor kit that will be exposed to rain/snow you can finish the design with a coat of spray laquer or water based sealant to provide better weatherproofing.